[FIXED] HP Envy 4520 troubleshooting

 HP is one of the famous companies in manufacturing and designing printers of high quality that can easily fill the needs and requirements of the users. These printers are not only portable and easy to use but are multifunction. And one of the most purchased printers is HP envy 4520 and HP photo smart 750 which are known for their high-quality printouts  but sometimes while using this printer you can go through various problems like:

• The printer prints a blank page.
• After giving the command the printer does not print.
• Scanning issues.
• Paper jamming problem.
• But behind this problem, there could be some issues that you should know in order to avoid.

• Malfunctioning of driver’s issue -There could not be a proper installation of the driver which is used to facilitate the communication between the operating system and device.
• Issues in printer spooler -The windows print spooler gets stuck whatever command is given to the printer will not be received and the printer will not respond on its own also.
• Over usage -When the printer is used for a long duration of time in a continuous manner it starts showing error due to the short life span it stops working as it is used without getting proper technical service at different time span to ensure that the printer works for a long time.
• Consumable’s issue-Majorly the printers stop working in the situation where there is no paper in the printer or there is a lack of ink which is required to print colored or black and white pages.

HP Envy 4520 troubleshooting Methods-

So if you are looking for ways to do HP envy 4520 troubleshooting then here are awesome methods:

1. Checking USB cable

Firstly check that the printer and computer are properly connected with are USB cables in order to ensure that there is proper connectivity between these two devices.

2. Properly giving command

Ensures that the command is given properly regarding the particular page which is needed to be printed.

HP Envy 4520 troubleshooting steps-

If the error continues even after that given are the following steps to fix the error:

• Step 1

1. If the printer is not open turn on the printer by pressing the on button.

2.Open the cartridge door by pressing the side buttons which are there on the sites of the printer.

• Step 2

Lift the lid which is on the cartridge and then slowly push the lid by doing this release the cartridge. Now pull up on the cartridge.

• Step 3

Put the cartridge on one side while the nozzle is facing Up.

• Step 4

Cross-check ink in cartridge if they are up to the marks or as per the estimated amount then they do not need to be replaced. If the cartridges are full of ink and still they are printing blank pages then continue these steps.

• Step 5

Replace cartridges that are empty.

• Step 6

Packaging should be removed of new cartridges and after that separate the plastic tape.

• Step 7

Make sure to properly close the door.

3.Checking the internet connection.

You must also make sure that your internet connection is proper and there is no problem with it because sometimes due to fluctuating or no or poor internet or network connection can cause some problems so check before connecting.

1. Even after all these steps if you still face any problem contact the customer care of HP printers they will help you on an immediate basis.